Movi Carbon Specs
Size and Weight
Dimensions Imperial (all versions) 16.1" x 13.6" x 16.73" (L*W*H)
410 x 345 x 425 mm (L*W*H)
Weight - BGH1 22.4 lbs / 10.2 kg (with SL4 Batteries)
18.5 lbs / 8.4 kg (without batteries)
Weight - BS1H 22.5 lbs / 10.2 kg (with SL4 Batteries)
18.6 lbs / 8.4 kg (without batteries)
Weight - Ember S5K*** 22.4 lbs / 10.2 kg (with SL4 Batteries)
18.5 lbs / 8.4 kg (without batteries)
Control
- Gimbal control (pan / tilt) and settings, camera start/stop and 3-axis lens control (focus / iris / zoom) controlled by Movi Controller and MIMIC + Bush Pilot****
- Full 3-axis pointing control (pan / tilt / roll) from the Movi Wheels (3-axis)** ***
Camera Package
Panasonic BGH1
- Captures 10bit 4k up to 60fps and FHD at 120fps, In V-Log L the BGH1 has 13+ stops of Dynamic Range
- Effective zoom range with Fujinon XK 20-120mm Lens = ~40-240 mm
- Remote Camera Control* – Run/Stop, ISO, WB, Shutter Angle and recording status
- Remote (wired) camera control – Ethernet (included cable)
- Video output – SDI (cable included)
- Dual SD card slots**
- Netflix Approved
Panasonic BS1H
- Captures 4k 12bit up to 60fps and FHD in 120fps (Super35 crop), In V-Log L the BS1H has 14+ stops of Dynamic Range
- Effective zoom range with Fujinon XK 20-120mm Lens = ~32-192 mm (Super35 crop)
- Remote Camera Control* – Run/Stop, ISO, WB, Shutter Angle and recording status
- Remote (wired) camera control – Ethernet (included cable)
- Video output – SDI (cable included)
- Dual SD card slots**
- Netflix Approved
Freefly Ember S5K***
- Captures 5k 600fps & 4k 800fps plus other aspect ratios and frame rates
- Effective zoom range with Fujinon XK 20-120mm Lens = ~32-192 mm
- Internal 4TB SSD (not swappable on set)
- Remote Control – Run/Stop
- Camera video output – HDMI (cable included)
Lens
Customized Fujinon XK 20-120mm lens for sharp, vivid images
Notes
Utilizing the Toad in the Hole receiver, Movi Carbon can be mounted to the included Movi Ring Pro II, or to anything you can mount a Toad to, including your Alta X, crane or 3rd party vehicle mounts.
Kit Checklist
Suggested accessories for a basic dual-op setup
Freefly Products
Movi Controller
- 13mm Dual Quick Release Mount
- 13mm Mounts
Secondary FIZ Controller
- MIMIC + Bush Pilot (for handing a FIZ axis to 1st AC or DIT, not a substitute for the Movi Controller)
- 25mm Pop-n-Lock (For attaching Wireless Video TX to Movi Carbon)
- Movi Pro Landing Gear – For flying Carbon under Alta X or Alta 8
3rd Party Products
- SD Card for BGH1/BS1H (Class UHS-II or higher)
- Wireless Video RX/TX (transmitter with appropriate connector for camera)
- V-Mount Battery for Movi Controller
Footnotes
*Camera and lens are completely integrated into the Movi Carbon and cannot be removed for other uses.
**Does not include removable solid state media
***Anticipated, but subject to change as development is finalized
****Movi Controller, MIMIC & Bush Pilot available separately. MIMIC can be used to give an additional operator control of a single lens axis, but not as a substitute for the Movi Controller for gimbal operations.
** ***Wheels cannot link directly to Carbon and will need either (optimally) a Movi Controller or a MIMIC for communication.