Freefly Systems Alta X with Pilot Pro RC Heavy Lift Industrial Drone

Alta X with Standard Remote ID (Travel Case, Not Gimbal Ready, Pilot Pro + Herelink RF)

Alta X was designed from the ground up to capitalize on the benefits of large, efficient props while maintaining the crisp control and unmatched precision the Alta line is known for. Alta X is built to carry just about anything with Freefly's integrated quick release system on top and bottom of the aircraft. The software stack is equally as flexible using Auterion Enterprise PX4 and supporting the MAVSDK. Alta X can also be equipped with the RTK GPS giving it centimeter level prevision by adding the Freefly multi-band RTK system.

Alta X folds to half its normal size with the push of a finger. The folding linkages stiffen the booms to ensure low vibration and precise flight characteristics.

Alta X ActiveBlade design reduces virbations to 1/5 the normal level. Reduced vibration means lower fatigue on components, longer motor bearing life, less payload vibration for cleaner data collection, and of course better footage when shooting.

Ships with Standard Remote ID.

Reliability without Compromise.

Freefly's team sweats the details so you don’t have to. They provide manufacturing tests and workflows to ensure Alta X will perform day after day in the harshest environments.

Designed, assembled, tested, and supported by the Freefly team at their headquarters in Woodinville WA, USA.

Prop size 33in Aircraft weight (dry) 20lb (9.7kg)
Max Payload 35lb (15.88kg)
Folded size Same as Alta 8
Case size Same as Alta 8
Quick release Toad in the Hole
Payload Mounting Top and bottom quick release
Voltage 12s
Batteries 2x 12s 16AH packs (or any 12s pack that can supply power needed)
Connector Dual XT90
Long Range Radio FRX Pro
RC Futaba
Payload vs flight time (rough payloads vs flight time) (~ 25 min flight times with a MoVI Carbon!!)

Do you guys provide engineering support to help us integrate X or Y?

We are happy to evaluate custom projects, but this is not our core business model and we have limited bandwidth for this type of engagement.

What kind of motors does Alta X use?

Alta X uses DJI E7000 motors.

After extensive testing by Freefly, these motors have proven to be very robust and reliable.

Is there a Synapse version of Alta X?

No.

Alta X will operate off the PX4 flight stack similarly to the Alta 8 Pro.

What is the maximum lift capacity of Alta X?

Max gross takeoff weight is 76.9lbs (34.9kg) at sea level, 0°C.

What is “ActiveBlade?”

ActiveBlade allows the blades on Alta X to flap to counter some of the undesirable impacts of dissymmetry of lift and cyclic loading. ActiveBlade reduces peak vibration levels to 1/5th of the level seen without ActiveBlade.

This enables better reliability, and more precise flight characteristics.

What kind of batteries does Alta X run on?

Alta X can accommodate a variety of Lithium Polymer (LiPo) flight battery packs.

Battery packs must be 12S, having a nominal voltage of 44.4 V
Only run Alta X using two packs at a time
Alta X has XT-90 battery connectors
Each pack must have a continuous discharge rating of 250 amps or greater, and a peak discharge rating of 500 amps or greater

How big is the case?

This burly Pelican Case for Alta X is the same case shell we use for Alta 8/Pro.

Exterior dimensions: 30x30x20.18? (76.2×76.2×51.26cm)
Weight (without Alta X or accessories): 55lbs (24.95kg)

What flight controller does Alta X use?

The Alta X flight controller is running the same open PX4 flight stack as Alta 8 Pro, for quick and powerful interfacing.

Can I use third party propellers on the Alta X?

No.

Does Alta X integrate with any of my favorite apps? (Pix4d, Drone Deploy, Precision Flight?)

For any systems where you can upload raw data, you’re able to use Alta X.

We have not formally integrated with any 3rd party apps yet, but will be exploring this in the future.

Additionally, if any 3rd party apps want to support Alta X it should be possible to do so using Mavlink / Dronecode.

Is Alta X Compatible with DroneCode SDK?

Yes, it is!

What FPV system does Alta X use?

Alta X can be configured from us with this NTSC FPV setup. It comes with a camera, 5.8Ghz transmitter, antenna, cables and mounting brackets.

The Alta FPV OSD overlay remains compatible with most analog FPV cameras and video transmitters. For those seeking a higher resolution or unobstructed HD/digital FPV view, a third-party system can be mounted.

Note: With HD systems, OSD overlay is not available, but the pilot will still have access to critical system telemetry through the ground station computer (which offers audible prompts).

What is the range of the Alta X Ground Station radio module?

Alta X uses a specially programmed FRX Pro for communication with a ground station computer. It is rated for operating ranges of 5000’+ (1500m+)*.

*Range is dependent on signal power settings, RF environment, and line of sight

Where can I find more data on the long range telemetry radio?

Alta X uses a specially programmed FRX Pro for communication with a ground station computer.

Are we able to customize the code on the Pixhawk?

Yes, but not yet. We need to push our code to PX4.

Which vibration isolators should I use with my payload on Alta X?

The Alta X quick-release isolator cartridges are available in different durometers, which gives the user the ability to fine tune vibration damping performance for different payload weights or ambient temperatures. Generally, hotter ambient conditions will see better results from higher durometer isolators.

Durometer options include 30A, 40A, 50A, 60A. The durometer of a cartridge is shown in recessed lettering on each of the O-rings. Use the chart below as a general guide choosing the correct isolator cartridges for your payload.

Can I use 6S packs in series, instead of 12S packs on Alta X?

6S LiPo packs with sufficient current delivery can be used to fly Alta X, but Freefly does not recommend this solution for a few reasons:

1. It is easy to make mistakes when combining cells in parallel and series, and mistakes can be dangerous (fire, damage to Alta X etc).
2. The streamlined workflow we developed using 2 batteries is compromised and the poor drone tech will frown at the task of charging and balancing 4 batteries per flight instead of instead of 2.
3. It can be difficult to mount batteries to the Alta X which are not the right size / shape, whereas the Alta X was designed to easily mount / dismount 12s hard case batteries.

Be safe out there!

FreeFly ALTA X Pilot Pro

Choose Options